Hot-Swappable, Modular Based 3 Phase UPS
1. System Introduction
MT-B Series is 30-300kVA Online HF double conversion topology. It adopts dual DSP controlled technology with modular parallel redundancy feature. System can parallel racks upto 4 racks. The system THDI≤4%,and system overall efficiency AC~AC upto 95%. Thus, MT-B Series can be defined as a high reliability and efficiency green power and suitable for medium to large data centers, precision equipment, and telecommunications industry.
2. System Features
2.1 High Performance Index
◆ 3/3 Phase double conversion online technology. Input 3 phase load balanced design.
◆ System adopts dual DSP controlled to enhance the overall reliability and keep low defective rate.
◆ 19 inch standard cabinet design to perfectly match equipment room working environment with 1.4 or 2 meter cabinet heights.
◆ Modular structural design. Each module is 30KVA. System can add from 1 to 10 modules. Maximum capacity 300KVA, user can be flexible to choose different capacity to match requirements. UPS modules can be hot-swappable to do online maintenance.
◆ High density module design. Each module is 3U. 1.4 meter height system cabinet can put maximum 5 modules with total 150VA.2 meter height system cabinet can put maximum 10 modules with total 300KVA.
◆ N+X Parallel Redundancy design. With X≥2 modules, UPS system reliable rate can be upto 99.9%,MTBF is upto 250K hours.
◆ Control module parallel redundancy. MT-B Series each module is independently controlled by own controlling systems. Any module failure will not be affecting the whole system. With hot-swappable technology, user can easily eliminate failed modules.
◆ Individual bypass design. Each module has built-in bypass breaker and bypass inductance to keep better system reliability.
◆ Share Common Battery Bank in parallel systems to reduce user initial battery investments.
◆ Flexible battery configuration (32-40 pieces selectable). User can choose customized configuration with 32/34/36/40 pieces.
◆ Charging current can be selectable. User can set battery capacity on the LCD panel to auto select the best charging rate for the batteries. Also various charging methods can be chose via front panel.
◆ Intelligent Charging Managements: Stage 1 with constant high charging current to reach 90% capacity. Stage 2 with constant voltage- flexible current charging to reach 99% battery capacity. Stage 3 will go to float charge. Charger will choose charging modes to activate battery lifetime and save battery investments.
◆ Big LCD touch screen (320*240 dot-matrix) display. Language can be chosen on the front screen. Rich operational information will be shown on the front screen such as all UPS parameters.
◆ Each module has additional LCD + LED display. User can simply check each module working status.
◆ Intelligent management system. User can choose SNMP adapter to remotely monitor UPS status.
◆ Standard Maintenance bypass feature. User does not need to pay extra for maintenance bypass.
◆ EPO equipped.
2.2 Safe and Reliable
◆ Parallel Redundancy Module Technology to increase system reliability;
◆ Online Hot-Swap feature to reduce system maintenance costs and comprehensively protects the Loads operations;
◆ MTBF is 1.5 times longer than traditional UPS systems;
◆ 90% of system components are from international famous brands. All devices has been aged and tested for 24 hours.
3. Rich Optional Accessories
MT-B Series rear panel provides flexible monitoring ports and accessories, such as SNMP Card (Optional), and parallel communication signal port, battery data port, EPO emergency shutdown port, and standard RS232 port.
4. Application Type
MT-B Series is designed for small and medium important equipment/application systems, such as SME data exchange centers, communication equipment industry, and precision instruments.
MT300/600/900/1200/1500L33-B (With 150KVA Rack) |
|
30KVA/60KVA/90/120/150KVA (1-5 x 30KVA Module) |
|
Host Machine Specification |
|
UPS Structure |
Online Double Conversion |
Type | High Frequency IGBT Rectifier |
Overall Efficiency (AC - AC) |
>95% |
Noise (In 2 meters) |
<50-65dB |
Working Temperature |
-10 to 40℃ |
Storage Temperature |
-25 to 55℃ (Without Battery) |
Humidity |
<95% Non-Condensing |
Standard |
IEC 62040-1, IEC 62040-2, IEC 62040-3 |
Parallel Redundancy |
Modular Parallel upto 10 Units, Rack Parallel Upto 2 Racks |
Protections |
Overload, Short-Circuit, Over Temp., Utility Power Voltage High/low, BAT Voltage High/low |
DC Start |
Available |
Generator Compatibility |
Available |
Display |
7 Inch LCD Color Touch Screen(multi-language)+LED Indicators |
Mute |
Auto |
Cabinet Standard |
IP 20 |
Cooling System |
Intelligent Speed Control Cooling Fan |
Elevation |
<1000M, Without Derated, >1000M: Derated 1% every 100M |
Rectifier Specification |
|
Input Voltage |
380Vac + N + W, 3 Phase |
Input Voltage Range |
208-475Vac |
Input Frequency Range |
40-70Hz |
Soft-Start |
> 60 Seconds |
Input Power Factor | 0.99 |
THDI | <3% (100% Non-Linear Load) |
Output Specification |
|
Output Nominal Voltage |
Line Voltage: 380/400/415×(1±1%)AC or Phase Voltage: 220/230/240×(1±1%)AC |
Output PF |
0.9 |
Output Voltage Regulation |
380Vac±1%(Static Load) 380Vac±2%(50-0% Sudden Change) 380Vac±2%(100-0% Sudden Change) |
Output Frequency |
±8% at 50Hz: Online Mode tracking input and bypass frequency ±0.1%: when input or bypass frequency is more than ±10% or under BAT Mode |
Distortion |
< 2%(Linear Full Load),< 5%(Non-Linear Full Load) |
3 Phase Unbalanced | 100% Allowed 3 Phase Unbalanced |
Output Volt Unbalanced Degree |
≤1%(Balanced Load) |
Input/Output Phase Swift |
≤1°(Balanced Load) |
Frequency Tracking Range |
47-63Hz |
Output Waveform |
Pure Sine Wave |
Overload |
110% Overload for more than 60 seconds <125%: 10 Mins <150%: More than 1 Min > 150%: More than 300ms |
Crest Ratio |
3∶1 |
Short-Circuit |
Circuit Auto Protection,Output Voltage/Current 0, Bypass Switch Tripping |
Output Abnormal |
INV. Output Auto-Locked Protection |
Bypass Specification |
|
Static Bypass Transfer Time |
0 ms |
Static Bypass Range |
380Vac(-15~+15%, selectable) |
Frequency Range |
±1Hz, ±2Hz, ±3Hz Adjustable |
Bypass -> INV Transfer Time |
2ms |
Frequency Tracking Speed |
0.5-2hz/s |
Manual Maintenance Bypass |
Available (Standard) |
Battery Specification |
|
Type |
Sealed Lead Acid Maintenance Free |
Model Rated Volts/Units |
±192Vdc/±204Vdc/±216Vdc/±228Vdc/±240Vdc |
Charger Size UPS Rack |
50A Max |
Charger Size UPS Module | 10A Max |
BAT Low Protection |
Shutdown Protection |
Communication Specification |
|
Communication Port |
Rs232 (Std.);/SNMP/RS485/ Dry Contact |
Remote Software |
Multi-functional Monitoring System, Online and BAT Mode Status, BAT Fault, Remote Control |
Physical Parameters |
|
90KVA Rack Size mm(W×D×H) |
600×840×1400 |
30KVA Module Size (W x D x H) |
443 x 580 x 131/3U |
30KVA Module Weight | 33Kg |
Cabinet Weight |
169Kg |
User name | Member Level | Quantity | Specification | Purchase Date |
---|
3/3 Phase Online
3/1 Phase Online
1/1 Phase Online
Modular UPS
Line-Interactive
Home Inverter
Telecom UPS/INV
Solar Products
Batteries